The Leading Manufacturer Of CNC Knee Mill Retrofit Hardware and Retrofit Kits  

Home
DIY Knee Mill Retrofit
RFQ.htm
Compu-Cut Retrofit RFQ.htm
Compu-Cut Features
Bridgeport EZ Trak Or Boss Upgrade
Rigid Tapping Adapter
Technical Items
Z Axis CNC Quill Kit
CNC XY Brackets
CNC XY Ball Screws
CNC Yoke
CNC Auto Lube Pump
CNC XY Limit Switch Kit
Visi-Series CADCAM
Used Equipment
Monster End Mills
Atrump
A one CNC Knee Mill
Acra Machinery
Centroidcnc
Centroid Users Forum
Fagor DRO's
Align Power Feeds
Torque-Rite Drawbar
AC Pro Drive
Hench Fog Buster
Sumitomo Carbide
Lyndex
Saylor Beall
MillWrite V6
VCarve CAM Engraving
EditNC
Re-Post
Interesting Links
Mill Parts for Sale

Search this site powered by FreeFind

Spindle Speed
Chip Load & Feed Rate Calculator

Simply Select
 

  1. Material to be machined
  2. Operation to be performed
  3. Tool diameter to be used
  4. Number of cutter tips

The recommended RPM and FEED RATE are AUTOMATICALLY DISPLAYED !

$69.95


 


AC Pro Drive

Features

  1. RPM and tool diameter simultaneously displayed
  2. Automatic Spindle Reversal for power tapping
  3. Stores up to 5 spindle speeds for instant recall
  4. Z-axis digital readout
  5. Instant electronic braking
  6. Digital RPM accurate in both gear ranges
  7. Gives years of quiet, smooth, maintenance free operation!
  8. Patented surface foot mode increases tool life and productivity!

Toolmaker

Basic model for general machining

Stores 1 surface foot rating

$1,899.00 220V 3 HP Models

$2,179.00 440V 3 HP Models

Programmable

This model can be used in the MANUAL mode like the Toolmaker. In addition, it can store up to five spindle speeds with their surface foot ratings and will instantly recall these presets This model has an additional feature which allows the operator to override programmed RPM for fine tuning without changing the programmed cutting tool diameters. In the AUTOMATIC mode, the controller displays spindle RPM and tool diameter as it is recalled. This enables the operator to associate recommended RPM versus tool diameter for material being machined.

$2,075.00 220V 3HP Models

$2439.00 440V 3 HP Models


Z Axis Option

The Z-Axis model contains all of the above features plus the addition of a
linear glass scale. The Z-Axis model is turned on and off by depressing the spindle
speed control knob. This switches the tool diameter display into the digital read out
mode. It allows the operator to use the controller just like a digital read out when
zeroing out and measuring depth.

By turning on the TAP MODE the Z-Axis model can be programmed to
reverse the spindle at a specific depth for tapping. Programming is accomplished
by rotating the spindle speed control knob to the desired depth. By holding in the control
knob momentariy, the tapping depth is stored into memory. The operator now only
needs to turn on the spindle and start tapping.

When the tap reaches the programmed depth the spindle will automatically reverse,
allowing the tap to exit the part. At .100 above the part, the spindle will automatically
reverse back to the original direction. This allows multiple tapping without the
operator having to manually reverse the spindle.

$2395.00 220V 3 HP Models  $2803.00 440V 3 HP Models

Kits are available for most milling machines

Kits also available for

220V 5HP Heads and 440V 5 HP Heads


AC Prodrive Dimension Sheet

Right Mouse Click

and Save Image As To Your Computer

Then print, fill out and fax back to

928-526-2301

Tell a Friend to Visit
Free Tell-a-Friend by Bravenet.com


(c) Copyright 2007 {Elrod Machine}. All Rights Reserved.

Home ] DIY Knee Mill Retrofit ] RFQ.htm ] Compu-Cut Retrofit RFQ.htm ] Compu-Cut Features ] Bridgeport EZ Trak Or Boss Upgrade ] Rigid Tapping Adapter ] Technical Items ] Z Axis CNC Quill Kit ] CNC XY Brackets ] CNC XY Ball Screws ] CNC Yoke ] CNC Auto Lube Pump ] CNC XY Limit Switch Kit ] Visi-Series CADCAM ] Used Equipment ] Monster End Mills ] Atrump ] A one CNC Knee Mill ] Acra Machinery ] Centroidcnc ] Centroid Users Forum ] Fagor DRO's ] Align Power Feeds ] Torque-Rite Drawbar ] [ AC Pro Drive ] Hench Fog Buster ] Sumitomo Carbide ] Lyndex ] Saylor Beall ] MillWrite V6 ] VCarve CAM Engraving ] EditNC ] Re-Post ] Interesting Links ] Mill Parts for Sale ]